Main Categories → Amaco Potter's Choice Medium Fire → Materials → Liquids
Liquids
![]()
Burma - Latex Mold Rubber/Resist
pint: $18.15
![]()
Darvan #7 SDS
Liquid deflocculant
pint: $19.45 ea
4 litre: $98.90 ea
![]()
Gum Solution SDS
CMC gelled in water (6.7%).
pint: $10.45 ea
Gallon: $39.50 ea
![]()
Laguna Wax Emulsion (Wax Resist) SDS
Similar to the old Moblicer wax resist. Dilute up to 50:50 with water is possible, as per your required performance. Testing is recommended prior to dilution.
Pint: $14.35
Gallon: $85.50
5 Gallon Pail: $347.00
![]()
Mould Soap SDS
A pure liquid (non-detergent) soap separator, used as a release when casting plaster/gypsum into a plaster mold, and to prevent plaster/gypsum products from adhering to most porous surfaces. PureLube may be used full strength or diluted with water. Apply with a clean sponge until foam appears, dab off excess and repeat the process until a sheen appears.
Pint: $18.95 ea
Reed Wax Emulsion
Use straight from jar, much thinner and easier to paint than wax emulsion (it will drip much more readily so be careful). Highly effective resisting action (if allowed to dry for 10 minutes at least). Avoid drips or applying in too thick of a layer (it can peel).
litre: $55.00
gallon: $209.00
![]()
Sodium Silicate SDS
Liquid deflocculant
pint: $9.50
4 litre: $44.50
![]()
Wax - Paraffin Slab
4.5 kg slab: $57.49
